Explanation Of The Product Label; Initial Set-Up; Inserting The Batteries - VOSS.farming FS10 Instrucciones De Operación

6.2

EXPLANATION OF THE PRODUCT LABEL

Icon Meaning
Disposal of electrical items
Documents the product's compliance with EU directives
Protected against splash water and foreign bodies according to
IP44
protection class IP44
Low voltage protection
Reading the instruction manual
7

INITIAL SET-UP

7.1

INSERTING THE BATTERIES

Info
Required tools: Phillips-head screwdriver, size 1 (PH1)
1. Remove the four battery compartment screws (8) on the back of the device.
2. Open the battery compartment (8).
3. Insert the enclosed batteries into the battery compartment (8) to connect with the
right poles.
NOTE
Do not mix old batteries with new ones. Remove empty batteries from the device.
4. Close the battery compartment (8) again and re-tighten the screws.
Info
Using rechargeable batteries may shorten the service life of your device.
24
INSTRUCTION MANUAL VOSS.FARMING FENCE SENSOR FS10
41645 | 11 | 2020 | V1