Functions With The Fence Manager; 10.1 Display Overview - Fence Manager; 10.2 Alarm Functions - VOSS.farming FS10 Instrucciones De Operación

INSTRUCTION MANUAL VOSS.FARMING FENCE SENSOR FS10
10

FUNCTIONS WITH THE FENCE MANAGER

The measured information from the Fence Sensor and the settings in the Fence
Manager are both transmitted every 15 minutes. The information and functions shown
in the Fence Manager are explained in the following.
10.1 DISPLAY OVERVIEW – FENCE MANAGER
f
e
d

10.2 ALARM FUNCTIONS

The Fence Manager emits an alarm signal in the event of a voltage drop in the fence or
a low battery level in the Fence Sensor.
Voltage
The minimum voltage level (c) on the fence can be adjusted using the Fence Manager.
The Fence Manager emits an alarm signal as soon as the transmitted voltage falls
below the set value (c).
Info
The Fence Sensor applies the settings as soon as the data has been transferred
(after 15 minutes at max).
Battery level
The Fence Manager emits an alarm signal as soon as the Fence Sensor battery level (d)
falls below 10%.
NOTE
► Replace the batteries within the next two weeks.
► Only use batteries that are approved by the manufacturer.
41645 | 11 | 2020 | V1
a
No.
a
b
b
c
d
c
e
f
Name
Connection quality between
the Fence Sensor and the Fence
Manager
Fence voltage in kV
Set voltage level for the alarm in
kV
Fence Sensor battery status
Time since last data transfer
Device type
DE
EN
EN
FR
IT
NL
SV
ES
PL
29