Mounting Example 2; Mounting Example 3; Led - VOSS.farming FS10 Instrucciones De Operación

8.2

MOUNTING EXAMPLE 2

Distribution over several fence systems. The benefit in this case is to enable immediate
localisation of the affected fence in the event of a voltage drop.
8.3

MOUNTING EXAMPLE 3

A combination of mounting examples 1 and 2. The benefit in this case is to enable
localisation of the affected fence and the position in the event of a voltage drop.
2
9

LED

The supplied magnet can be used to query the device status. To do so, hold the magnet
against the magnetic point (3) on the side of the device for less than one second.
ऀ LED lights up red: device is switched off
ऀ LED lights up green: device is switched on
28
INSTRUCTION MANUAL VOSS.FARMING FENCE SENSOR FS10
1
FENCE 1
FENCE 1
1
2
FENCE 2 FENCE 3
3
FENCE 2
5
3
4
41645 | 11 | 2020 | V1