External Ir Input - ATON HDR44 Manual Del Usuario

EXT. IR INPUT
ATON multi-room applications can utilize the EXT.IR IN port of a single HDR44 chassis for IR
control from a Universal/Learning RF-to-IR remote control. Use a 3.5mm mono interconnect
cable to connect between an IR OUT port of a third party RF to IR converter and the EXT. IR IN
port of the HDR44.
Note: This application is designed to work with a single chassis HDR44 system. For more
advanced multi-chassis applications utilizing the EXT IR INPUT, please visit our website at
www.atonhome.com.
RF-to-IR
Converter
ATON AIR5
IR Receiver
Figure 3-3: ATON AIR5 to EXT. IR INPUT
Multiple zones of a single HDR44 chassis can be controlled when utilizing an ATON AIR5 IR
Receiver connected to the HDR44 EXT. IR INPUT.
Note: This application is designed to work with a single chassis HDR44 system. For more
advanced multi-chassis applications utilizing the EXT IR INPUT, please visit our website at
www.atonhome.com.
12
HDR44 4x4 High Defi nition Video Router
HDR44
RF DATA
STATUS
PWR
USB
3.5mm
Mono
Interconnect
Cable
Figure 3-2: EXT. IR INPUT
©2008 • All rights reserved.
HDR44