Source Ir Emitter Outputs - ATON HDR44 Manual Del Usuario

HDR44 4x4 High Defi nition Video Router
SOURCE IR OUTPUTS
Connect a standard IR Emitter (ATON AIE2, for example) from the Source IR OUT port on the
rear of the HDR44 to the IR receiver on the front of the audio/video source (see Figure 3-4).
The four source IR outputs are source specifi c. For examle, IR port "1" must be mounted to the
video source connected to "Component Video Input 1". For sources that have an IR Input port
on the back of the unit, use a 3.5mm to 3.5mm mono interconnect cable instead .
IR Emitter
Component Video Connections
HDR44
BluRay Disc™
Figure 3-5: Component Video Signal Chain
© 2008 • All rights reserved.
HDR44
3.5mm mono
interconnect cable
BluRay Disc™
Figure 3-4 SOURCE IR OUTPUTS
HD Video Display
SPDIF SPDIF
Y
R44WP
L P
B
R P
R
IR IN IR OUT OUT
IR Receiver
13