Appendix A: R44Wp Hd Receive Wall Plate - ATON HDR44 Manual Del Usuario

Appendix A: R44WP HD Receive Wall Plate

The R44WP wall plate has component video, digital and analog audio, and IR connections that
connect to the Video and Audio inputs of each zones HD Video Display. A run of (2) two Cat-5
Cables terminated to T-568A standard (see page 16) is used between the location designated
for the R44WP and the HDR44.
DIP Switch Settings R44WP
DIP Switches on the R44WP provide proper Control and Gain settings for variable lengths of
Cat-5 cable, up to 500 feet. See the DIP Switch Setting Table for proper settings versus length.
Note: Both DIP Switches must be set independently for the same cable length.
Figure A-1: R44WP DIP Switches
Cat-5 Cable Length
(ft)
0-25
25-75
75-150
150-250
250-350
350-450
450-500
28
HDR44 4x4 High Defi nition Video Router
R44WP
1 2 3 4 1 2 3 4
Control
Gain
Control DIP Switch
Setting
Table A-1: R44WP DIP Settings
Gain DIP Switch Set-
ting
©2008 • All rights reserved.