Using The R44Irm; Individual Zone Control; System-Wide Zone Control - ATON HDR44 Manual Del Usuario

HDR44 4x4 High Defi nition Video Router
Using The R44IRM Remote

Individual Zone Control

When using R44IRM from an individual zone using an R44WP with an ATON IR receiver, only the
1
four source buttons need to be pressed. The zone buttons are not used.
Figure 4-2: Individual Zone Control
System Wide Zone Control
When using the R44IRM from a single location using an IR receiver plugged into the EXT. IR IN
port of the HDR44, the zone
source 3 in zone 4, the button sequence must be Zone 4, then Source 3. Once the zone has
been selected only the source buttons need to be used.
Figure 4-3: System Wide Zone Control
© 2008 • All rights reserved.
AIR1 IR Receiver
2 1
and source buttons must be used. For example, to select
ATON AIR5
IR Receiver
SPDIF SPDIF
Y
L P
B
R P
R
IR IN IN
IR OUT OUT
R44WP
HDR44
25