Component Video Inputs - ATON HDR44 Manual Del Usuario

COMPONENT VIDEO INPUTS

Use high-quality component video cables to make connections between video sources
and the HDR44's inputs. Sources will typically be located near the HDR44 at the head-
end of the system. Component video outputs as well as audio outputs and IR will be
sent via Cat-5 cables from the head-end to R44WP HD Receive wall plates located
throughout the house. Use high-quality component video cables to connect to each
HD video display from the R44WP as well. See Figure 3-12 on page 17 for detailed
R44WP to HD video display connections.
Y
Pb
Pr
Video Source
Component Output
Figure 3-6: COMPONENT VIDEO INPUTS
Source Audio Connections
HD Video Display
IR Receiver
R44WP
HDR44
BluRay Disc™
Figure 3-7: HDR44 Audio Pathway
14
HDR44 4x4 High Defi nition Video Router
Component
Video Patch
Cables
Analog Path
SPDIF SPDIF
Y
L P
B
Digital Path
R P
R
IR IN IN IR OUT OUT
©2008 • All rights reserved.
Audio Receiver