Suzuki 57100-0482 Serie Instrucciones Para El Montaje página 11

Connection of Grip Heater Lead Wire
1. Pass the grip heater switch lead wire and left and right grip heater
lead wires into the guides (c). Fix them using the Clamps 6 as
shown in the illustration.
NOTE:
• Check that there is no excessive tension nor remarkable slack in the grip
heater switch lead wire and left and right grip heater lead wire.
• Cut off the excess clamps.
GSX-S1000/A
3
1. Clamp the left grip heater lead wire, grip heater switch lead wire and left handlebar switch
lead wire. Face the locked part of clamp to downward.
2. Clamp the left grip heater lead wire, grip heater switch lead wire, left handlebar switch lead
wire and clutch cable. Face the locked part of clamp downward.
3. Clamp the right grip heater lead wire and right handlebar switch lead wire at the front brake
hose union. Face the locked part of clamp to downward.
4. Right grip heater lead wire
5. Right handlebar switch lead wire
6. Front brake hose
7. Throttle cable
2 2
(C) (C)
(C) (C)
8. Clutch cable
a: 10 – 30 mm (0.39 – 1.18 in)
b: 50 – 70 mm (2.0 – 2.7 in)
GENUINE SUZUKI ACCESSORIES
1
5 4
8
6
7
11/17