Function Checking and Inspection
1. Check if the lead wire is not under an undue force when the throttle
grip is fully open, or when the handlebar is turned fully to the right
and to the right.
2. Check if the left side grip heater is securely adhered.
After Engine Is Started
1. Check if the engine idle speed is not changed when the handlebar is
fully turned to the right and the left.
2. Check if the lighting devices as the headlamp operate correctly.
3. Check if the heater gets warm by changing the position of the switch.
Handling Method
•
Grip heater warms right and left
grips when the Grip Heater
Switch 2 is turned on with the
engine running. The grip heater
switch will be turned off when
the ignition switch is turned off.
Switch
GENUINE SUZUKI ACCESSORIES
15/17