Specifications - Yamaha ATS-930 Manual De Instrucciones

Specifications

Item specifications
Front L/R 30 W x 2 ch
Amplifier Maximum Rated
Section Output Power
Subwoofer 60 W
Acoustic suspension type
Type
(Non-magnetic shielding type)
Front
Speaker Driver 6.5 cm (2-1/2") cone x 2
Section
Frequency
150 Hz to 22 kHz
Response
Bass reflex type
Type
(Non-magnetic shielding type)
Subwoofer
Driver 7.5 cm (3") cone x 2
Section
Frequency
50 Hz to 150 Hz
Response
Supported audio PCM (2ch)
Decoder signal (TV, BD/ Dolby Digital
DVD) DTS Digital Surround
Digital (Optical) 2 (TV, BD/DVD)
Input Jacks Digital (Coaxial) 1 (COAXIAL)
Analog (RCA) 1 (ANALOG)
U.S.A. and Canada models: AC 120 V, 60Hz
Power Supply Taiwan model: AC 110—120 V, 50/60Hz
Other models: AC 220—240 V, 50/60Hz
Power
22 W
Consumption
Standby Power
Less than 0.5 W
Consumption
General
890 x 91 x 115 mm (not including stands and
brackets)
Dimensions
(35" x 3-5/8" x 4-1/2")
(W x H x D)
890 x 109 x 121 mm (including stands and brackets)
(35" x 4-1/4" x 4-3/4")
Weight 4.0 kg (8.8 lbs)
* Specifications are subject to change without notice.
This system employs new technologies and algorithms that make it possible to achieve 7.1 channel surround
sound with only front speakers, and without using wall reflections.
"UniVolume" is a trademark of Yamaha Corporation.
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are
trademarks of Dolby Laboratories.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited.
DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a
trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
"Blu-ray Disc™", "Blu-ray™", and the logos are trademarks of the Blu-ray Disc Association.
15
En