geberit EFP 2 Instrucciones De Servicio página 15

Guarantee
Use
Structure
1 Pressing device
2 Pressing cylinder with
press piston
3 Pressing jaw
4 Roller area
5 Locking pin
6 Filler screw
7 Start button
CAUTION
Damage to the device from incorrect connection
` Only connect the tool to mains voltage as indicated on the
specification plate
The national statutory guarantee applies. For information about
guarantee services above and beyond this scope, please contact
your responsible Geberit sales company directly or visit
www.geberit.com.
The pressing tool is only allowed to be used for pressing pipes and
press fittings in the Geberit Mepla and Geberit Mapress press fitting
systems.
Only tools and accessories with the compatibility code
allowed to be used.
Any other utilisation is deemed to be a violation of the intended use.
Geberit will not accept any liability for damage resulting from this.
The pressing tool consists of
• Pressing device
• pressing jaws or
• adapter with pressing collars or
• MapressMAM jaw adapters
The equipment may vary depending on the scope of supply.
1
7
6
Operating instructions EFP 2
2
3
5
4
EN
are
15