Technical Data - geberit EFP 2 Instrucciones De Servicio

Function
Safety coupling
Automatic pressing
function
Swivelling pressing head

Technical data

16
Operating instructions EFP 2
The EFP pressing tool functions electromechanically. The power is
transmitted via a safety coupling. The safety coupling switches off
when the maximum press capacity has been reached.
An automatic pressing function ensures that the pressed joint is
completely finished. For safety reasons, the automatic pressing
function does not switch on until 20% of the press capacity is
reached. The pressing process then continues automatically and
cannot be interrupted.
The pressing tool has a swivelling pressing head. It can only be
turned before the pressing process by holding the pressing tool by
the handle and turning the front part of the pressing cylinder.
Nominal voltage
Mains frequency
Power input
Protection class
Protection degree
Cable length
Nominal force
Net weight
Noise level at user's ear
Vibration value
Temperature range during operation
See specification plate
See specification plate
560 W
II
IP 20
5 m
32 kN
6.0 kg
75 dB(A)
≤ 2.5
m/s²
-20 °C - +60 °C