Operation - Ryobi JS550L Manual Del Operador

Sierra de vaiven contorneadora orbital con laser
Ocultar thumbs Ver también para JS550L:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

wARNINg:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
wARNINg:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes and other possible
serious injuries.
wARNINg:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of at-
tachments or accessories not recommended can result
in serious personal injury.
wARNINg:
To avoid possible serious injury, keep hands and fingers
away from the area between the gear housing and saw
blade clamp.
APPLICATIONS
You may use the jig saw for the purposes listed below:
 Sawing non-ferrous metal, sheet steel, wood, plastic,
and similar materials.
SwITCh
See Figure 4, page 14.
To turn the saw ON, depress the trigger switch. Release
trigger switch to turn the saw OFF.
LOCk-ON bUTTON
See Figure 4, page 14.
The saw is equipped with a lock-on feature, which is conve-
nient when continuous cutting for extended periods of time
is required. To lock-on, depress the trigger switch, push
in and hold the lock-on button located on the side of the
handle, then release trigger switch. Release lock-on button
and your saw will continue running.
To release the lock, depress the trigger switch and release.
If you have the lock-on feature engaged during use and your
saw becomes disconnected from power supply, disengage
the lock-on feature immediately.
All manuals and user guides at all-guides.com

OPERATION

VARIAbLE SPEED
See Figure 5, page 14.
The saw has a variable speed control selector designed to
allow operator control and adjustment of speed and power
limits. The speed and power of your saw can be increased
or decreased by rotating the variable speed control selector
in the direction of the arrows shown in figure 5.
NOTE: Hold the saw in normal operating position and turn
the variable speed control selector to the positive symbol
to increase speed and power. Turn to the negative symbol
to decrease speed and power.
If you desire to lock the switch on at a given speed, depress
the trigger switch, push in and hold the lock-on button, and
release the trigger switch. Next, adjust the variable speed
control selector until the desired speed is reached.
Avoid running your saw at low speeds for extended periods
of time. Running at low speeds under constant usage may
cause your saw to become overheated. If this occurs, cool
your saw by running it without a load and at full speed.
The following guidelines may be used in determining correct
speed for various applications:
LOw speed is ideal when minimum speed and power is
required, for example, starting cuts.
MEDIUM speed is suitable for cutting hard metals, plastics,
and laminates.
hIgh speed produces best results when maximum power
is required, for example, cutting wood. Soft metals such as
aluminum, brass, and copper may also require high speeds.
10
wARNINg:
Before connecting the saw to power supply, always
check to be sure it is not in lock-on position (depress and
release trigger switch). Failure to comply could result in
accidental starting and possible serious injury. Also, do
not lock the trigger on jobs where the saw may need to
be stopped suddenly.
wARNINg:
Do not insert saw blade into air vents. They could come
in contact with electrically live internal parts, and cause
electrical shock resulting in serious injury.

Publicidad

Tabla de contenido
loading

Tabla de contenido