Assembly - Ryobi JS550L Manual Del Operador

Sierra de vaiven contorneadora orbital con laser
Ocultar thumbs Ver también para JS550L:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

UNPACkINg
This product requires assembly.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
wARNINg:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACkINg LIST
Variable Speed Orbital Jig Saw
Blades (2)
Vacuum Attachment
Edge Guide
Case
Operator's Manual
wARNINg:
If any parts are damaged or missing do not operate this
tool until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
All manuals and user guides at all-guides.com

ASSEMbLy

TO INSTALL JIg SAw bLADES
See Figure 2, page 14.
 Unplug your saw.
 Lift the clamping lever on the rapid-change blade clamp
 Holding the clamping lever up, insert the saw blade as
 Check to make sure the back of the saw blade is centered
 Release the clamping lever. Make sure the blade is
DUST PICk-UP FEATURE
See Figure 3, page 14.
For dust pick-up operation, a vacuum attachment has been
provided with the saw. It attaches to the saw base.
To Install:
 Unplug the saw.
 Slide the vacuum attachment into the curved area at the
 Attach vacuum attachment to a 1-1/4 in. vacuum hose.
 Connect vacuum hose to cleaner.
To Remove:
 Unplug the saw.
 Remove the vacuum attachment by pulling attachment
9
wARNINg:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
wARNINg:
Do not connect to power supply until assembly is com-
plete. Failure to comply could result in accidental starting
and possible serious personal injury.
until it stops.
far as possible into the slot in the saw bar.
in the groove of the roller guide.
securely in place.
rear of the saw base until it snaps into place.
from base.

Publicidad

Tabla de contenido
loading

Tabla de contenido