Description; Components; Function - BADU JET Turbo Pro Traducción De Las Instrucciones Para El Manejo Originales

Description

3 Description
3.1

Components

Fig. 1
1 Installation housing
4 Suction nozzle
20 Motor
42 Ball nozzle
47 Adjustment aid
64 Piezo button
3.2

Function

The system (1) is designed for installation in a concrete pool and
in a sturdy steel or plastic pool with a smooth wall in the assembly
area.
It is driven by a motor (20), the power of which can be adjusted in
different stages by a frequency converter.
It is switched on and off and controlled by piezo buttons (64) in
the front panel (55) and can also be adjusted by a remote control
unit (66).
The power is transmitted by a magnet-coupled drive unit (2/3) to
the propeller wheel (33).
The water is sucked in at the panel gratings (5) through a suction
nozzle (4) to the propeller wheel (33) and fed back into the pool
with a powerful volume flow.
14 EN
2/3 Drive unit
5 Panel
33 Propeller wheel
46 Screws
55 Front panel
66 Remote control unit
08|2020