Select DATE / TIME
Select the desired date and time format.
Set the time zone.
Set the date and time.
Choose if you would like to enable day light savings time.
When complete press the BACK button.
Set up the Analyzer preferences
From the SETUP menu select PREFERENCES
Select voltage and current trace colors.
Select default screens Scope mode and DMM mode
Select line weight
Enable of Disable Grid Lines
Enable and Set Time for AUTO Shutdown
[If the unit is powered off of battery and NOT recording it will shut
down after the delay time selected.
When complete select SAVE AND EXIT
MPQ1000
GETTING STARTED
3
Part No. 85635 Rev. 1 Dec 2016