Safety Instructions; Height And Tilt Adjustment - Enraf Nonius Manumed Tilt Manual De Uso

4 Safety instructions

4.1

Height and tilt adjustment

!
Ensure that neither the patient nor yourself can
get any part of the body or clothes in between the
moving parts of the mechanism when the table is
being raised, lowered or tilted.
! ! ! !
In order to guarantee the safety of the pre-programmed operation, the bench must be reset once a
month. This resetting is performed by bringing the bench, tilted fully horizontal, to its highest position.
If during the operation of the Manumed Special Tip-Up Bench unexpected movements or strange
behaviours occur, its operation must be immediately stopped. Then help the patient from the bench and
take the following action: Reset the bench by bringing it, tilted fully horizontal, to its highest position.
Should this not produce a satisfactory result, contact an Enraf-Nonius authorised dealer.
Important:
No longer use the bench in the meantime and also ensure that others cannot make use of this bench.
3