Uncrate The Machine; Transporting The Machine - Nilfisk Advance SC5000 Instrucciones De Uso

A - ENGLISH

UNCRATE THE MACHINE

When the machine is delivered, carefully inspect the shipping packaging and the machine for damage. If damage is evident, save the shipping
carton (if applicable) so that it can be inspected. Contact the Nilfisk Customer Service Department immediately to file a freight damage claim.
Refer to the unpacking instruction sheet included with the machine to remove the machine from the pallet.

TRANSPORTING THE MACHINE

CAUTION!
Before transporting the machine in an open truck or trailer, make sure that . . .
•
All tanks are empty.
• All access doors are latched securely.
• Lower scrub deck and squeegee then press Emergency Stop (A) or disconnect batteries to prevent them from raising when the machine is
powered off.
• The machine is tied down securely - see Tie Down Locations (21) in "Know Your Machine". Only use locations designated as "Tie Down
Locations" to secure the machine during transport. Using any other location of the machine to tie down the machine may cause damage or
injury.
• The machine's electromagnetic brake is engaged (not manually overridden), see "Electromagnetic Brake" section if necessary.
•
The machine is turned off and the magnetic SmartKey is removed.
A - 4
INSTRUCTIONS FOR USE
Advance SC5000 - 56091219 1/2021