A - ENGLISH
DETERGENT SYSTEM PREPARATION (ECOFLEX MODELS ONLY)
FILL THE DETERGENT CARTRIDGE
CAUTION!
Always follow the instructions on the labels of the detergent cartridge when using floor cleaning detergents. Wear the appropriate
personal protective equipment such as gloves and eye protection when handling floor cleaning detergents.
In the event of a detergent spill follow these four steps:
• Communicate the hazard. Immediately notify others working in the area and any supervisory personnel of the hazard, and if the
situation warrants it, evacuate the area.
• Control the spill. Ensure the spill does not become any worse.
• Contain the hazard.
• Clean up the spill and any damage safely.
The Detergent Cartridge (8) is located beneath the seat. Fill the detergent cartridge with a maximum of 1 gallon (4 Liters) of detergent.
SERVICE NOTE: Remove the detergent cartridge from the machine prior to filling to avoid spilling detergent on the machine.
It is recommended that a separate cartridge be used for each detergent you plan to use. The detergent cartridges have a white decal on them so
you can write the detergent name on each cartridge for clarification. When installing a new cartridge, remove the Factory Cap (AA) and place the
cartridge in the machine. Install the Dry Break Cap (BB) and detergent hose as shown in Figure 2-7.
The system should be purged of previous detergent when switching to a different detergent (see "To Purge When Changing Detergent").
FIGURE 2-7
A - 20
INSTRUCTIONS FOR USE
Advance SC5000 - 56091219
BB
AA
8
1/2021