Marklin Digital 60978 Manual Del Usario página 42

CV
Explanation
Configuration:
Bit 0: Reverse the locomotive's direction properties
0 = normal direction
1 = invert direction
Bit 1: number of speed levels
29
half levels 14 or 27
0 = 14 speed levels
1 = 27 speed levels / half levels
Bit 2: turn analog operation on/off
0 = analog off, 1 = analog on
Expanded configuration:
Bit 0: number of addresses, LSB
49
Bit 1: number of addresses, MSB
Bit 2: automatic consecutive addressing
(on / 1=off)
Alternative formats:
Bit 0: analog AC off = 0 / analog AC one = 1
50 Bit 1: analog DC off = 0 / analog DC on = 1
Bit 2: DCC off = 0 / DCC on = 1
Bit 3: mfx off = 0 / mfx on = 1
Bit 0: Motor inverted 1= on, 0 off
Bit 1: Light inverted 1= on, 0 off
51 Bit 2: Track inverted 1= on, 0 off
Bit 3: Aux 3 (1= logical, 0= amplified output)
Bit 4: Aux 4 (1= logical, 0= amplified output)
* () = 6021 Control Unit {} = the values entered are multiplied times "x" (factor).
42
CV Table for fx (MM)
Values
0 - 7
0 - 7
0 - 15
0 / 1
0 / 2
0 / 4
0 / 8
0 / 1
0 / 2
0 / 4
0 / 8
0 / 16
Default
Notes
The direction properties refer to the direc-
tion of travel and the lights.
The number of speed levels and half levels
6
depend on the locomotive controller.
Only digital operation or also conventional
operation. Flipping back and forth between
the modes is possible during operation.
0 = one | 1 = two | 0 = three | 1 = four
5
0 Add. | 0 Add. | 1 Add. | 1 Add.
0 = auto. sequence on / 1 = auto. sequence off
Note:
15
fx (Motorola) cannot deactivate itself
The values of the required settings must be
0
added up.