Fuse Replacement - Chauvet HURRICANE 1300 Guía De Referencia Rápida

EN
Product Overview
AC Power

Fuse Replacement

Mounting
Product
Mounting
Diagram
Power Switch
Fuse
Holder
Power In
Manual-Fog
Button
This product has a fixed voltage power supply and it can work with an
input voltage of either 120 V, 60 Hz or 230 V, 50 Hz, depending on the
specific model.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Mounting
Clamp
Mounting
Bracket
Nozzle
Low-Fluid Indicator
Wireless
Manual
Control
Control
3
Hurricane™ 1300 QRG
Fluid
Level
Indicator
Back Panel View
Safety Cable
Bracket Adjustment Knob