Fuse Replacement - Chauvet LFS-5 Guía De Referencia Rápida

EN
What Is
Included
To Begin
Description
Overview and
Mounting
Mounting
AC Power
Power Linking

Fuse Replacement

• LFS-5
• Power Cord
• 4 Metal Gobos
Unpack your LFS-5 and make sure you have received all parts in good
condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The LFS-5 is a compact and lightweight LED framing spot, with framing
shutters that can alter the beam to highlight specific areas. Using the included
gobos or your own custom gobos, you can project your image from any
distance with the 16°-24° zoom range.
Mounting
Bracket
Framing
Shutter
(x4)
Bracket
Adjustment
Knob
Before mounting this product, read the Safety Notes.
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 23 LFS-5 products at 120 VAC or 45 units at 230 VAC.
1. Disconnect the product from power.
2. Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3. Remove the blown fuse from the holder and replace with a fuse of the
exact same type and rating.
4. Re-insert the fuse holder and reconnect power.
• Warranty Card
• Quick Reference Guide
Power Out
3
LFS-5 QRG
Fuse
Holder
Power In