Fuse Replacement - Chauvet FREEDOM PAR RGBA Manual Del Usuario

Fuse
Replacement
Page 14 of 88
All manuals and user guides at all-guides.com
Disconnect the product from power before replacing the fuse.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the fuse holder out of the housing.
4. Remove the blown fuse from the holder.
5. Replace with a fuse of the exact same type and rating.
6. Insert the fuse holder back in place and reconnect power.
Spare fuse holder
(inside safety cap)
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with one of the same type and rating.
Freedom™ Par RGBA and Strip Mini RGBA User Manual Rev. 4
Installed fuse
(held by plastic clip)
Safety cap