Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Fuse
Replacement
Page 14 of 88
Disconnect the product from power before replacing the fuse.
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the fuse holder out of the housing.
4.
Remove the blown fuse from the holder.
5.
Replace with a fuse of the exact same type and rating.
6.
Insert the fuse holder back in place and reconnect power.
Spare fuse holder
(inside safety cap)
A spare fuse is not included; however, the safety cap has room for a spare.
Always replace a blown fuse with one of the same type and rating.
Freedom™ Par Quad-5 and Strip Mini Quad-5 User Manual Rev. 5
Installed fuse
(held by plastic clip)
Safety cap
Publicidad
Tabla de contenido
