Fuse Replacement - Chauvet Radius 2.0 Guía De Referencia Rápida

Radius 2.0™ QRG
What Is
Included
To Begin
Product
Description
Overview
AC Power
Power Linking

Fuse Replacement

• Radius 2.0™
• Power Cords
Unpack your Radius 2.0™ and make sure you have received all parts in
good condition. If the box or contents appear damaged, notify the carrier
immediately, not CHAUVET®.
The Radius 2.0™ is an effect light that creates multiple rings of color using
red, green, blue, white, and amber LEDs. Sound-activated programs dance
to the music and power linking saves time running cables.
Fuse Holder
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 20 Radius 2.0™ products at 120 VAC and 37 units at
230 VAC.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
• Warranty Card
• Quick Reference Guide
LED Display
Back Panel View
3
Sound Sensitivity Knob
EN