Brita FGA1907 Manual Del Usuario página 4

Before using the Water Filter Bottle for the first time, clean the bottle
without the MicroDisc with a mild detergent or in the dishwasher. Clean
the Water Filter Bottle regularly by hand or in the dishwasher
fore cleaning remove the MicroDisc
during the cleaning process. It is also recommended to remove the seal
before cleaning your bottle. The seal can be cleaned separately
5
by hand or in the dishwasher. To ensure an optimum level of hygiene,
we recommend placing the MicroDisc in a clean cup every week and
carefully pour boiling water over it. If the MicroDisc floats to the surface,
use a spoon to hold the MicroDisc to the bottom of the cup. After five
minutes, you can reinstall the MicroDisc into the water filter. Please
make sure that your hands are clean when touching the disc and bottle.
Take the MicroDisc out of the packaging. Before using the MicroDisc
for the first time, soak the MicroDisc in warm water for 1 minute
to remove any carbon dust that may be present and to
I. For quality
from the very start
1) Cleaning the bottle
2) Preparing the MicroDisc
optimize water flow.
4 | English
EN
and store it on a clean surface
4
B
. Be-
A