Replacement Parts - Hach MET ONE 6000P Manual De Usuario

Note: Product and Article numbers may vary for some selling regions. Contact the
appropriate distributor or refer to the company website for contact information.

Replacement parts

Description
Cable, Service port, 8-pin DIN to 9-pin
RS232 serial connector
Connector, female, 7-pin
Connector, male, 8-pin, terminal strip
Connector, backshell for 410-150-7761
Filter, zero count, 0.2 µm, 1/4-in. tube
Fuse, T, 2 A, 250 V, slow blow
Power cord, 115 VAC, 1.8 m (6 ft)
Power cord, 230 VAC, 1.8 m (6 ft)
Sample probe, isokinetic, stainless steel,
28 L/min (1.0 cfm), 1/4-in. tube
Sample probe, isokinetic, stainless steel,
28 L/min (1.0 cfm), 3/8-in. tube
Tubing, Hytrel, 1/4-in. ID
Tubing, Hytrel, 3/8-in. ID
Accessories
Description
4-channel output option, firmware
Bracket, to mount an external light stack and isokinetic
probe
Bracket, wall, to mount an external light stack
Quantity Item no.
1 2088379-01
1 410-400-1507
1 410-150-7761
1 410-500-4408
1 203813-3
1 590815
1 VP623501
1 VP623500
1 2082646-2
1 2084148-02
3 m (10 ft) 960011
3 m (10 ft) 960380
Item no.
2088601-15
2088480
2088482
Accessories (continued)
Description
Cable, external light stack connector, 3 m (9.8 ft), stainless
steel/polyvinyl chloride (PVC)
External light stack, stainless steel without cable
Fitting, air inlet, 3/8-in., barb
Sample probe, extended, vertical wall mount, stainless
steel, 28 L/min (1.0 cfm), 30.5 cm (12 in.)
Sample probe, extended, vertical wall mount, stainless
steel, 28 L/min (1.0 cfm), 40.5 cm (16 in.)
Sample probe with external light stack bracket, extended,
vertical wall mount, stainless steel, 28 L/min (1.0 cfm),
30.5 cm (12 in.)
Sample probe with external light stack bracket, extended,
vertical wall mount, stainless steel, 28 L/min (1.0 cfm),
40.5 cm (16 in.)
Sample probe, mounting kit, T-type wall
Sensor, relative humidity (RH) and temperature, with cable
Item no.
2088397-01
2088396-01
2088594
2080999-3
2080999-4
2080999-9
2080999-10
2082644-3
2088373-01
English 23