Fabric Tightening Function - FAAC TM2 ERY Manual De Usario

FABRIC TIGHTENING FUNCTION

By programming this function, the motor after reaching the outer limit, automati-
cally performs a short backwards turn to tighten the fabric. Specially designed for
pergolas and horizontal awnings.
N.B: The programming of this option can be made only after setting the limit
switches.
STARTING THE SETTING PROCEDURE:
Tn: Already programmed remote control
+
B C
Tn
This first process brings the awning to the open position and sets the motor into
"dead man" operating mode. Thereafter, the fabric tensioning position can be
adjusted accurately.
ADJUSTMENT AND CONFIRMATION OF THE TENSIONING POSITION
Tn: Already programmed remote control
A
Tn
After adjusting and confirming the tensioning position, the motor drives to the open
position and returns to the new tensioning position which has just been confirmed.
From this moment, each time the motor reaches the open position, automatically
it will turn back to the "tensioning position".
DELETING THE TENSIONING POSITION
Tn: Already programmed remote control
+
B C
Tn
TM2 ERY
+
B C
Tn
adjusting
+
B C
Tn
36
B
Tn (2 sec)
B
Tn (2 sec)
confi rming
A
Tn (2 sec)
A4518_6G40_Rev.A