DeWalt DCH417 Traducido De Las Instrucciones Originales página 30

EnGLIsh
HEAVY-DUTY CORDLESS ROTARY HAMMERDRILL
DCH417
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
No‑load speed
No‑load Impact rate
Single impact energy (EPTA 05/2009)
Maximum drilling range in steel/wood/concrete
Maximum diameter for cores
Optimum drilling range in concrete
Optimum drilling range in concrete for cores
Tool holdler
Collar diameter
Battery Type
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN60745‑2‑6:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into concrete
Vibration emission value a
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
h ,Cheq
Uncertainty K =
Drilling into metal
Vibration emission value a
h , D
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60335‑2‑69EN60745 and may be used to compare
one tool with another. It may be used for a preliminary assessment
of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
28
WALT one of the
e
V
DC
min
‑1
bpm
J
mm
mm
mm
mm
mm
kg
dB(A)
dB(A)
dB(A)
= m/s²
m/s²
= m/s²
m/s²
= m/s²
m/s²
m/s²
m/s²
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
DCH417
the job. This may significantly reduce the exposure level
54
over the total working period.
Identify additional safety measures to protect the operator
1
from the effects of vibration and/or noise such as: maintain
0–725
the tool and the accessories, keep the hands warm (relevant
0–4200
for vibration), organisation of work patterns.
4.5
13/32/32
EC‑Declaration of Conformity
127
Machinery Directive and Radio Equipment
10‑24
Directive
52‑80
SDS plus®
54
Li‑Ion
Heavy-Duty Cordless SDS max® Combination
4.1 Hammer
DCH417
WALT declares that these products described under Technical
D
e
Data are in compliance with:
92
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
103
These products also comply with Directive 2014/53/EU and
2011/65/EU.For more information, please contact D
3
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
6.3
1.5
5.2
Markus Rompel
1.5
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
≤ 2.5
65510, Idstein, Germany
1.5
01.02.2021
a
WARNING: To reduce the risk of injury, read the
≤ 2.5
instruction manual.
1.5
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WALT at the
e
WALT.
e