Sauder Shoal Creek Lateral File 418658 Manual Del Usuario página 17

Step 13
Refer to the enlarged diagram to identify the parts on the
å
HINGES and HINGE BRACKETS.
The DOORS may need some adjustments. Follow the text
å
below to make needed adjustments. DOOR ADJUSTMENTS:
To adjust the DOORS from side to side (horizontal), turn the
å
adjusting screw in or out.
To adjust the DOORS up and down (vertical), loosen both
å
screws that fasten the HINGE BRACKETS to the END. Move the
DOORS up or down to the desired location. Tighten the screws
after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting
å
screw one turn and move the DOORS in or out, as needed.
Tighten the mounting screw after making adjustments.
www.sauder.com/services
Adjusting screw (horizontal)
418658
Mounting screw (depth)
(vertical adjustment)
Page 17