Sauder Shoal Creek Lateral File 418658 Manual Del Usuario página 25

Step 21
To make adjustments to the drawer, loosen SCREW #4 in the SLIDES a 1/4 turn, then turn the
å
CAM clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the
CAM. The higher the screw in the oblong hole, the higher your drawer front will be. The lower
the screw, the lower the drawer front. By adjusting the drawer this way, it will help the DRAWER
FRONT line up better when closed. Tighten the SCREW when fi nished with adjustments.
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. To clean your unit, dampen a cloth with tap water and wipe.
å
And to celebrate, why not share your success story?
Loosen screw #4 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #4.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
www.sauder.com/services
Cam
418658 Page 25