Black 1-9/16" Flat Head Screw - Sauder Shoal Creek Lateral File 418658 Manual Del Usuario

Step 14
1
The tabs should insert freely into the
slots. Gently tilt the DRAWER SIDES side
to side until the tabs slip into the slots.
D87
Groove
Insert the DRAWER SIDES (D87 and D88) at an angle
å
into the slot at each end of the DRAWER BOX FRONT (K).
3
Minimum
190 degrees
M63
K
Surface with
HIDDEN CAM
Fasten the DRAWER BRACE (M63) to the DRAWER
å
BOX FRONT (K). Tighten one HIDDEN CAM.
Page 18
K
D88
Maximum
Arrow
210 degrees
VIEW THE T-LOCK BOX VIDEO
2
With the palm of your hand, tap the
DRAWER BOTTOM down into the groove.
D87
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D729) into the grooves
å
in the DRAWER SIDES (D87 and D88) and DRAWER
BOX FRONT (K).
4
D87
M63
Fasten the DRAWER BACK (D61) to the DRAWER
å
SIDES (D87 and D88) and DRAWER BRACE (M63). Use
five BLACK 1-9/16" FLAT HEAD SCREWS (30S).
418658
D729
K
D88
Start each screw a few turns before
completely tightening any of them.
30S

BLACK 1-9/16" FLAT HEAD SCREW

(5 used in this step)
D61
Be sure the
DRAWER
BOTTOM
inserts into
the DRAWER
D88
BACK groove.
www.sauder.com/services