Silver 3/4" Machine Screw - Sauder Shoal Creek Lateral File 418658 Manual Del Usuario

Step 12
Fasten one of the DOORS (G) to the LEFT END (B). Use
å
the screws in the HINGES.
NOTE: You may need to loosen the mounting screw to
å
slide the HINGE slightly out of the slot. Retighten the
screw before mounting the HINGE to the END.
Peel the BUMPER from the BUMPER CARD (29M). Stick
å
a BUMPER on the DOOR where it comes in contact with
the SHELF (E).
Fasten a PULL (7K) to the DOOR (G). Use two SILVER
å
3/4" MACHINE SCREWS (20S).
Repeat this step for the other DOOR (G).
å
(2 used)
7K
G
29M
20S

SILVER 3/4" MACHINE SCREW

(4 used in this step)
Page 16
E
B
418658
Stop
Mounting
screw
Hinge
www.sauder.com/services