Frigidaire FRSS2323AS Uso Y Cuidado página 25

Part
Interior &
Door Liners
Door Gaskets
Drawers & Bins
Glass Shelves
Toe Grille
Exterior & Handles • Soap and water
Exterior & Handles
(Stainless Steel
Models Only)
Replacing
LED Bulbs
CARE AND CLEANING
Care & Cleaning Tips
What To Use
• Soap and water
• Baking soda and water
• Soap and water
• Soap and water
• Soap and water
• Glass cleaner
• Mild liquid sprays
• Soap and water
• Mild liquid sprays
• Vacuum attachment
• Non Abrasive Glass
Cleaner
• Soap and water
• Stainless Steel Cleaners
• Unplug refrigerator
• Wear gloves
• Replace the Refrigera-
tor light cover by slid-
ing the cover forward
along the top
• Replace old LED bulb
• Replace light cover
• Plug in the refrigerator
Tips and Precautions
Use 2 Tbsp of baking soda in 1 qt
of warm water. Be sure to wring
excess water out of sponge or cloth
before cleaning around controls,
light bulb or any electrical part.
Wipe gaskets with a clean soft cloth.
Use a soft cloth to clean drawer
runners and tracks.
Allow glass to warm to room
temperature before immersing
in warm water.
Vacuum dust from front of toe grille.
Remove toe grille (see Installation
Instructions). Vacuum backside,
wipe with sudsy cloth or sponge.
Rinse and dry.
Do not use commercial household
cleaners containing ammonia,
bleach or alcohol to clean handles.
Use a soft cloth to clean smooth
handles. DO NOT use a dry cloth to
clean smooth doors.
Never use CHLORIDE or cleaners
with bleach to clean stainless steel.
Clean stainless steel front and
handles with non-abrasive soapy
water and a dishcloth. Rinse with
clean water and a soft cloth. Use a
non-abrasive stainless steel cleaner.
These cleaners can be purchased at
most home improvement or major
department stores. Always follow
manufacturer's instructions. Do not
use household cleaners containing
ammonia or bleach.
NOTE: Always clean, wipe and dry
with the grain to prevent scratch-
ing. Wash the rest of the cabinet
with warm water and mild liquid
detergent. Rinse well, and wipe dry
with a clean soft cloth.
CAUTION: Wear gloves when replac-
ing LED bulbs to avoid getting cut.
Use only a 5-watt or less AC LED
light bulb.
25