GOK SmartBox 1 Instrucciones Para El Montaje Y El Funcionamiento página 25

Menu Input function
Select the medium
2.Liquid
Medium
Fuel oil
Water
Diesel
Biodiesel
RME, FAME
Rape oil
Palm oil
Motor oil
AdBlue
Regular petrol
Premium petrol
Density value
Select Tank shape with [Enter]
3.Tank shape
Default setting
Linear
linear tank, rectangular tanks, vertical cylinders,
basement-welded steel tanks.
cylindrical tank with arched ends
Cylinder
horizontal tanks, tubular tanks
horizontal
typical shape for steel outdoor or buried tanks.
spherical tank; buried tanks with spherical
Ball-shaped
basic shape; frequently plastic buried tank (GRP).
oval basement tanks; typical shape of GRP
Oval
tanks and single-walled sheet metal tanks.
Plastic battery tanks, convex,
Convex
slightly convex shape, alternative to linear.
Plastic battery tanks, concave,
Concave
slightly concave shape, alternative to linear.
Plastic tank with recess,
Holed
plastic tank with a large recess (hollow) in the center
plastic
(without tape bindings).
Lying cylindrical tank with flat ends,
Tube w.
tube segment with straight end plates.
flat ends
Typical tank shape for smaller diesel tanks.
Metal oil Plate tank or plate tank battery
linear side walls, with semicircular arc top and bottom.
tanks
Enter a special tank shape from existing bearing chart.
Bearing
For this purpose, up to 16 value pairs (height in cm +
chart
volume in L) can be entered.
Before the value pairs are entered, the values for the
tank volumes must be entered in in steps "4.Tank
volume" and "5. Internal tank height".
Artikel-Nr. 28 100 51 h
®
SmartBox 1 / SmartBox
Density value kg/m³ (15 °C)
845 kg/m³ - default setting
999 kg/m³
830 kg/m³
880 kg/m³
880 kg/m³
915 kg/m³
910 kg/m³
865 kg/m³
1090 kg/m³
743 kg/m³
750 kg/m³
Enter a special density value with
different measuring range
® ®
2 / SmartBox
Input value
_______kg/m³
If the density of
the stored
medium is
unknown, the
reference
height can be
entered in
menu item
"10.Trim
height"
25 / 112
3