Starting The Engine - Honda Power Products EM25 Manual De Explicaciones

5. STARTING THE ENGINE

CAUTION:
When starting the generator after adding fuel for the first time, after
long-term storage, or after running out of fuel, turn the fuel valve lever
to the ON position, then wait for 10 to 20 seconds before starting the
engine.
Before starting the engine disconnect any load from the AC receptacle.
1.Turn the fuel valve lever to the ON position.
NOTE:
Turn the fuel valve lever to the OFF position when transporting the
generator.
FUEL VALVE LEVER
ON
2.Turn the engine switch to the ON position.
ON
ON
ENGINE SWITCH
19