Honda Power Products EM25 Manual De Explicaciones página 29

AC applications
1.Start the engine and make sure the green Output indicator comes on.
2.Switch ON the AC circuit breaker.
3.Confirm that the appliance to be used is switched off, and plug in the
appliance.
OUTPUT INDICATOR
LIGHT (GREEN)
ON
CAUTION:
• Substantial overloading will switch off the AC circuit breaker.
Marginal overloading may not switch off the AC circuit breaker, but it
will shorten the service life of the generator.
• Be sure that all appliances are in good working order before
connecting them to the generator. If an appliance begins to operate
abnormally, becomes sluggish, or stops suddenly, turn off the
generator engine switch immediately. Then disconnect the appliance,
and examine it for signs of malfunction.
NOTE:
If an overloaded circuit trips the AC circuit breaker, reduce the electrical
load on the circuit, and wait a few minutes before resuming operation.
26
AC CIRCUIT BREAKER
ON