Maintenance And Storage; Product Accessories; Symbols And Definitions - Braun Pulse oximeter 1 Manual De Instrucciones

Maintenance and storage

1. Replace the batteries when low voltage symbol is lit.
2. Clean the surface of the oximeter before it is used to
take a measurement.
3. Remove the batteries if you will not use the oximeter
for an extended amount of time.
4. For product preservation store the device in 14-104 ºF
(-10~40 ºC) and 10%-95% humidity.
5. It is recommended that the product should be kept dry
at all times. Excessive humidity might affect its lifetime
and even damage the product.
To protect the environment, dispose of empty
batteries at appropriate collection sites according
to national or local regulations.

Product accessories

One lanyard
One user manual
2 AAA 1.5V alkaline batteries
Manufacturer's Declaration—Electromagnetic Radiation—To
Other Equipments and Systems
The pulse oximeter is designed to be used in specified electromagnetic
environment . Users of the pulse oximeter must use it in the following
environments.
Radiation Test
RF interference
CISPR 11
RF interference
CISPR 11

Symbols and definitions

Type BF
Applied Part
Operating
104 F
temperature
41 F
Compliance Electromagnetic Environment-
Guidance
Group 1 RF signal of the pulse oximeter is
simply created by its internal function.
Therefore, its RF interference is very
low and is not likely to cause any
interference to nearby electronic
equipments.
Class B The pulse oximeter is applicable to all
institutions, including communities and
domestic buildings which is directly
connected to the public low-voltage
power supply network.
80%
Operating
Humidity
Consult Instructions
for Use
English
13