Island Installation; Typical Installation - IKEA NEDDRAGEN Manual De Instrucciones

Overhead Cabinet Should Not Exceed a
Maximum Depth of 15" (38.1 cm)
30" (76.2 cm) Min. Clearance
Between the Top of the Cooking
Platform and the Bottom of
an Unprotected Wood or Metal
Cabinet
24" (61 cm) Min. when
Bottom of Wood or Metal
Cabinet is Protected by
Not Less Than 1/8" Flame
Retardant Millboard Covered
With Not Less Than No. 28
MGS Sheet Steel, 0.015"
(0.4 mm) Stainless Steel,
0.024" (0.6 mm) Aluminum or
0.020" (0.5 mm) Copper

Island Installation

1⅛"
(2.9 cm)
Figure 2b– Minimum Recommended
Distance From Behind the Cabinet Front
Figure 2a – COUNTERTOP CUTOUT OPENING
MODEL G
4"
30"
(10.2 cm)
18"
(45.7 cm)
E
*See
Figure 2b
Approximate Location of
Junction Box
* Letters on this figure refer to chart on
H
previous page except for G and H.
7½"
(19.1 cm)
A
Min.
*See
( 25.4 cm)
Figure 2c
D
12"
(30.5 cm)
Figure 2c– Minimum Recommended
Distance Between Rear Edge of
Cutout and Nearest Combustible
Surface Behind Countertop
10"
25" Min.
F
(63.5 cm Min.)
For a drawer installation below
the cooktop, allow Dimension G of
clearance underneath the countertop.
The drawer must not interfere with the
electrical installation of the cooktop or
contain flammable materials.

Typical Installation

2"
(5 cm)
H
Min. From
Edge of Cooktop
to Nearest
Combustible Wall
(Either Side of
Unit).
backsplash
Wall
5