Fein ABLK18-1.3TE Serie Instrucciones De Uso página 14

en
14
Adjustments.
Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Setting the cutting direction
(figure 4).
Unscrew the union nut approx. 3 turns.
Pull the die downward.
Turn the die in the cutting direction, then
push it up ensuring that the die engages in the
groove.
Tighten the union nut.
Fig. 4
Union nut
Die
3.
5.
1.
2.
3.
4.