11.4 Cleaning Reminder
When the reminder appears, cleaning is recommended.
Use the function: Pyrolytic Cleaning.
11.5 How to use: Descaling
Turn off the oven and wait
until it is cold.
Duration of the first part: around 100 min
Step 1
Place the deep pan on the first shelf position.
Step 2
Pour 250 ml of the descaling agent in the water drawer.
Step 3
Fill the remaining part of the water drawer with water to the maximum level until the
signal sounds or the display shows the message.
Step 4
Select: Menu / Cleaning.
Step 5
Turn on the function and follow the instruction on the display.
The first part of descaling starts.
Step 6
After the first part is over, empty the deep pan and put it back on the first shelf posi‐
tion.
Duration of the second part: around 35 min
Step 7
Fill the remaining part of the water drawer with water to the maximum level until the
signal sounds or the display shows the message.
Step 8
When the function ends, remove the deep pan.
When this function works, the lamp is off.
Turn off the oven.
Before you start:
Remove all accessories.
When descaling ends:
When the oven is cold, dry the
cavity with a soft cloth.
CARE AND CLEANING
Make sure that the water drawer
is empty.
Leave the oven door open and
wait until the cavity is dry.
125/376