Shutting Down The Instrument - Chopin Mixolab 2 Instalación Rápida

E. Cleaning the instrument after each test
After each test has been carried out, it is necessary to clean the mixing bowl with care.
Wait for the mixing bowl to cool down: the indicator should turn green, showing that the lid is unlocked.
1. Place the nozzle on the water tank after cleaning it.
2.
Open the lid and pull out the mixing bowl.
3. Unscrew the positioning screw from the mixing bowl.
4. Remove the front cover.
5. Remove the two mixing arms.
6. Remove the back cover.
7. Immerse all parts into lukewarm water and, using
the brush, clean them carefully. Remember these are
precision parts and must be handled with care. Do not
drop or allow damage these parts.
8. Dry the parts thoroughly using a dry cloth.
3
6

SHUTTING DOWN THE INSTRUMENT

1. Shut down the application.
2. Shut down the Mixolab 2 completely, using the switch located on the rear of the device.
1
4
7
1
2
2
5
8