Safety Recommendations - STORZ & BICKEL HYBRID Volcano Modo De Empleo

2 . E X P L A N AT I O N O F S Y M B O L S , WA R N I N G S A N D
The Hot Air Generator must never
be repaired or transported when the
power plug is plugged in.
The ventilation slots as well as the
hot air outlet of the Hot Air Genera-
tor must not be closed, obstructed,
or blocked while the device is being
used, nor while it is cooling down.
When they are hot do not touch the
hot air outlet, the Filling Chamber,
or the Tube Flexer when using the
Tube, whilst they are hot.
The Filling Chamber may only be
attached for filling the Valve Balloon
or during use of the Tube Kit. After
filling the Valve Balloon or after us-
ing the Tube Kit, the Filling Chamber
must be removed from the Hot Air
Generator to avoid excessive heat-
ing (danger of burning) of the Filling
Chamber.
Do not put
or objects in the hot air jet.
Caution! Hot surface!
The Hot Air Generator must not be
used in damp or wet conditions.
Never touch the Hot Air Generator
with wet or damp parts of the body.
Do not use in an atmosphere with
risk of explosion or ignition.
The manufacturer is not responsib-
le for any damage or personal injury
caused by inappropriate, incorrect or
S A F E T Y R E C O M M E N D AT I O N S
any body parts
irresponsible use.
2.3. Safety Recommenden-
Do not use the device if the
Power Cord is damaged.
Check the packaging and the
housing of the Hot Air Generator.
In case the housing appears to be
damaged, please send back the de-
vice immediately.
Before connecting the Hot Air Ge-
nerator, make sure that the informa-
tion given on the type label on the
underside of the Hot Air Generator
corresponds to the mains supply at
the place of installation.
In case of doubt, or malfunction
during operation, immediately dis-
connect the power plug from the
socket.
If you have any concerns, ask a spe-
cialist to check whether the electri-
cal system is in accordance with the
local safety regulations.
The use of multiple sockets and/
or extension cables is not recom-
mended. However, if this is absolu-
tely necessary, only products with a
quality certificate (such as UL, IMQ,
VDE, +S etc.) may be used, provided
the specified power exceeds the
power required (A=Ampere) by the
64
dations