Cleaning Of The Heating Element - STORZ & BICKEL HYBRID Volcano Modo De Empleo

7. O P E R AT I N G T H E V O L C A N O H Y B R I D
Manual cleaning with isopropyl alcohol
(70 %) or detergent
Warning!
Isopropyl alcohol is
flammable and may easily
ignite.
The safety instructions fur-
nished by the manufactu-
rer of the isopropyl alcohol
must be observed!
Do not immerse plastic parts
in isopropyl alcohol for more
than half an hour. Prolonged
contact with isopropyl alcohol can
lead to color changes or embrittle-
ment of the plastic parts.
After cleaning, check all component
parts for surface damage, tears, soft-
ening or hardening, impurities, distor-
tion and discoloration and set dam-
aged component parts aside.
7.8.1. Cleaning of the Heating
Element
CAUTION
Hot surface of the
Filling Chamber
Caution! Hot surface!
• Let the VOLCANO HYBRID
cool down completely before
starting the cleaning process.
Carefully wipe
the heating element with a cloth
moistened only with water, not dripping
wet, as soon as visible residues, dust
or particles are deposited.This will
remove any residue, dust, or particles
that may have entered into the airflow.
88
the surface of