The Filling Chamber Cap; Disassembling The Volcano Hybrid Filling Chamber - STORZ & BICKEL HYBRID Volcano Modo De Empleo

7. O P E R AT I N G T H E V O L C A N O H Y B R I D
7.8.2. Disassembling an Assembling

the Filling Chamber Cap

Push the upper Screen downwards, by
using (for example) the handle of the
Cleaning Brush supplied.
Push out the upper Screen with help of the
Cleaning Brush
Push the Cap Cylinder downwards out
of the Cap Housing. At the same time
the Cap Ring will be stripped off.
Push the Cap Cylinder out of the Cap
Housing
Reassemble in reverse order.
Slide the cap cylinder into the cap
housing and let it lock in place, then
strip the Cap Ring from above over the
cap cylinder up to the cap housing.
When using ground plant material,
press the upper Screen into the cap
cylinder from below and let it lock in
place in the notch provided for this
purpose.
When using extract (aromatic oils), the
two Screens are not required. Only the
Drip Pad is used instead of the lower
Screen.
The upper Screen has to be
placed carefully into the in-
tended notch. If this is not ob-
served, particles of herbs can get into
the Valve Balloon or the Tube and be in-
haled.
7.8.3. Disassembling the
VOLCANO HYBRID
Filling Chamber
Press the Filling Chamber Cylinder
with Screen or, if necessary, Drip Pad
upwards out of the Filling Chamber
Housing.
89
Cap Ring
Cap Housing
Touch Guard
Cap Cylinder
upper Screen