General Setup - Mettler Toledo 4000TOC Guia De Inicio Rapido

6

General Setup

%sat
21.7
°C
25.0
MENU
Quick Setup
Analog outputs
pH
7.0
°C
25.0
Aout1 min= 0.000 pH
Aout1 max= 14.00 pH
10
(PATH: Menu/Quick Setup)
While in Measurement mode press the [MENU] key to bring up the Menu selection.
Select "Quick Setup" and press the [ENTER] key.
Display Convention:
1st line on display © a
2nd line on display © b
Select the units of measurement for a and b. Only lines a and b can be configured in
Quick setup. Go to the Configuration Menu to configure lines c and d.
By selecting Yes the linear 4–20 mA analog output Aout1 will be set up for measure-
ment a when [ENTER] is pressed. Selecting No means that no analog output is set up.
Aout1 min, Aout1 max are the minimum and maximum measurement values for the
4 and 20 mA values respectively.
3rd line on display © c
4th line on display © d