Water Ace AC R106 Manual Del Usuario página 3

INSTALLATION
1
Do Not Run Pump Dry!
Oil
OIL THE PUMP
Oil the pump with 1/2 tablespoon food grade
mineral or vegetable oil with each use. Pour
the oil in the 'IN' port.
NOTICE: The pump depends on the liquid
flowing through it for lubrication.
DO NOT RUN THE PUMP DRY!
If the pump does not start to move water in
30 seconds or less, recheck the installation
and plumbing.
Mount the pump solidly on a stable
platform.
2
IN
Water OUT
USE 1/2" HOSE (OR LARGER)
Use a reinforced hose on the inlet. The pump
should be less than 10' above and less than
25' to one side of the water source. Make the
outlet hose as short as possible – 25' or less.
Check the washer in the inlet fitting to make
sure it is airtight. If this joint leaks air, the
pump will not operate.
3
1/2" or Larger
Outlet Hose
O U
T
I N
Water IN
1/2" or Larger
Reinforced
Inlet Hose
4837A 0205
WA782