Yamaha R-S300 Manual De Instrucciones página 33

Details of the menu items are as follows. The
configuration will be reflected to the input source
currently selected.
y
The default settings are marked with "*".
Volume
MaxVol, IniVol
Submenus:
Adjustable range
–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)
(MaxVol):
Adjustable range
Off*, Mute, –89.5dB to +16.5dB (0.5 dB step)
(IniVol):
Sets items for volumes.
MaxVol (Maximum volume)
Sets the maximum volume level so that the volume will not
be accidentally increased above a certain level. For
example, you can adjust the volume between –89.5 dB and
–5.0 dB (or Mute) when you set this parameter to "–5.0dB".
The volume can be increased to the maximum level when
this parameter is set to +16.5 dB (default).
IniVol (Initial volume)
Sets the volume at the time this unit is turned on. When
this parameter is set to "Off", the volume level used when
this unit was set to standby is applied.
Note
If "MaxVol" is set to a value lower than the "IniVol" setting, the
setting for "MaxVol" overrides the "IniVol" setting. For
example, if you set "MaxVol" to "–30.0dB" and "IniVol" to
"0.0dB", the volume is automatically set to "–30.0dB" the next
time this unit is turned on.
FM Mode
STEREO*, MONO
Choices:
Sets the FM broadcast receiving mode (see page 18).
"FM Mode" is displayed in the Option menu only when
TUNER is selected as the input source.
Auto Preset
Automatically detects FM radio stations and registers
them as preset stations (see page 19).
"Auto Preset" is displayed in the Option menu only when
TUNER is selected as the input source.
Clr All Preset
Clears all preset stations (see page 22).
"Clr All Preset" is displayed in the Option menu only
when TUNER is selected as the input source.
SETTING THE OPTION MENU FOR EACH INPUT SOURCE
Interlock
ON*, OFF
Choices:
When an iPhone/iPod is connected to this unit wirelessly
using a Wireless System for iPod, the iPhone/iPod can be
used to turn this unit on, set it to standby mode or select
DOCK as the input source.
"Interlock" is displayed in the Option menu only when
using a Wireless System for iPod and DOCK is selected as
the input source.
ON This unit responds to certain iPhone/iPod
operations.
OFF Disables this feature.
Connect/Disconnect
Connects to or disconnects from a Bluetooth component
(see page 29).
"Connect/Disconnect" is displayed in the Option menu
only when DOCK (Bluetooth) is selected as the input
source.
Pairing
Pairs the Bluetooth Wireless Audio Receiver and a
Bluetooth component (see page 28).
"Pairing" is displayed in the Option menu only when
DOCK (Bluetooth) is selected as the input source.
31
En