Parts Diagram - Singer Stitch Sew Quick Manual Del Usuario

Using Your Stitch Sew Quick Handheld Mending Machine
Note: Always use the rotating dial to move the needle. To avoid damaging the inner mechanism,
never directly press on or pull the needle arm.

PARTS DIAGRAM

BEFORE FIRST USE:
When using the device for the first time, run it for 10
a ]
seconds and then wait for 5 seconds. Then you can
use it continuously.
Lift the fixing plate and pull out the test material.
b ]
Cut the thread close to the test material.
INSTRUCTIONS FOR USE:
Make sure that the appliance is in Off position.
1 ]
(See Figure #1. The On/Off button should be slid
towards the back of the appliance). Turn the rotating
dial to set the needle arm to the highest position.
Note: The rotating dial can be turned to either
direction. (See Figure #1)
Figure #1
Figure #2
Figure #3